Skip to Navigation | Skip to Content

Pipe Scanning

Pipe Scanning

Advanced pipeline inspection with the SLOFEC' technique is a fast and low preparation inspection solution with a high sensitivity in the detection of general corrosion and wall thickness pipes up to 30mm. With pipe scanning tools suitable for pipes with 1' diameter onwards, painted and coated pipes can be inspected over a wide range of temperatures. The immediate generated colour mapping reporting represents the detected defects in size and wall loss.

The aims of pipe inspection are:

  1. Identification of corrosion areas
  2. Determination of pipe integrity
  3. Following the required authority's health and safety requirements
  4. Verification of previous inspection results

Innospection's SLOFEC' technique for pipe inspection offers the following advantages:

  1. Fast screening of large areas within a short time
  2. Low surface preparations and limited cleaning prior to inspection
  3. High sensitivity in detecting internal and external corrosional defects ((individual pitting, microbiological corrosion, carbon dioxide corrosion, etc)
  4. Inspection over a wide range of wall thicknesses
  5. Inspection through different coatings and cladding types
  6. Inspection over a wide range of temperatures
  7. Differentiation of the different defect positions or other occurrences
  8. Provision of reliable, accurate and repeatable results

Innospection's pipe inspection capabilities for both on- and offshore applications using the SLOFEC' technique are:

  • Experienced with pipe diameter ranging from 1' to 56'
  • Experienced with pipe wall thickness up to 30mm
  • Experienced with coating thickness up to 7mm
  • Experienced with pipe temperatures up to 170 deg C
  • Able to inspect horizontal and vertical pipes both internally and externally
  • Able to inspect different pipe materials (carbon steel, stainless steel, duplex, super duplex, monel, etc)
  • Able to provide online 'Real Time' inspection analysis including wall loss severity classifications
  • Separate reporting available for both internal and external conditions with advanced colour defect mapping capability
  • Defect assessment, integrity and monitoring support

Contact Details:
Innospection Ltd (Aberdeen)
Howemoss Avenue,
Kirkhill Industrial Estate Dyce
Aberdeen
United Kingdom
AB21 0GP

Telephone:   +44 1224 724 744
Fax:                +44 1224 774 087
Email:             info@innospection.com